Chery B11. Manual — part 10
Audio System
41
track ,or back to the beginning of current
track by using APC function.
Ÿ
Skip to next track (FF APC)
Press 8 (9) for two times when tape
is playing, the tape will fast forward
to the next programme and start next
track
Ÿ
Skip back to the beginning of current
track (REW APC)
Press 7 (7) for two times when tape
is playing, the tape will fast rewind
and start current track.
Ÿ
Cancel FF/REW APC
restart to
play
Press PAUSE (8)
The tape player will stop APC mode
automatically when the tape is at the
beginning of next track (FF APC) or
current track (REW APC)
The function is called “monitor mode”
Dolby Noise Reduction System
Dolby B Noise Reduction System enhance
the volume balance for high frequency
signal during tape play. And the volume
can be reset to original volume. Dolby B
Noise Reduction System decrease the
hoarse noise which is common
phenomenon for tapes.
Dolby B Noise Reduction System is
certificated by Dolby lab. Dolby and
double-D symbol is the registration brand
of Dolby lab licence Co., ltd.
1.Press Dolby NR (18) to select Dolby
mode. Press Dolby NR every one time,
mode will be switched according to below
sequence.
Dolby B NR ON
Dolby NR OFF
Dolby B NR ON
2.Select Dolby B NR ON, the display
show “B NR”.
Track beginning scan
Track beginning scan function scan and
play the beginning 10 seconds for all
tracks on the tape.
This function will continue automatically,
till it is cancelled out.
Audio System
42
1.Press SCN (16) to start track beginning
scan. The display show “SCN”.
2.Press SCN (16) again to cancel track
beginning scan function. “SCN” disappear
from the display, and continue to play
current track.
Ÿ
When track beginning scan
function works, the tape player
will use the auto-reverse
feature if it reaches the end and
continue track beginning scan,
the display show “SCN”.
Ÿ
If you switch to other mode
during track beginning scan,
the tape player will stop this
function automatically, when
scanning to next track (APC
function).
Repeat play
Repeat function can replay the current
track. The function will continue
automatically, till it is cancelled out.
1.Press RPT (14), the indicator light of
“RPT” on display is on, the tape player
will repeat current track.
2.Press RPT (14) again to cancel repeat
function. “RPT” disappears from the
display, the tape player switch back to
normal mode.
Blank skip
Blank skip function can skip the blanks
longer than 12 seconds on the tape.
1.Press RDM (15), the indicator light of
“BLS” on display is on, the tape player
fast forward to the beginning of next track.
2.Press RDM (15), cancel blank skip
function. “BLS” will disappear from the
display, the tape player switch back to
normal mode.
Attention:
Below tapes may have problems to play
APC, track beginning scan, repeat and
blank skip function:
Ÿ
Tapes with low volume
Ÿ
Tapes with big cacophony between
tracks
Ÿ
Tapes with long pause between
tracks
Audio System
43
Ÿ
Tapes with blanks shorter than 4
seconds between tracks.
Other advantageous function
Clock setting
1.Press DISP (1) switch to adjustment
display.
2.Press DISP (1) and M4 (17) for more
than one second at the same time, “1:00”
display starts to flash.
3.Press 7
7
or 8 (9) select hour or
minute.
Ÿ
Use 24 hours display mode.
4.Press DISP (1) save time in memory.
5.Press DISP (1) switch back to former
mode.
Attention
You can NOT set clock during starting the
engine. The clock will go back to default
when the battery is used up or discharged,
or this appliance is discharged.
Hand free function for mobile
phone (Presetting configuration)
1.When calls received by the mobile, LCD
display will immediately show “TEL”
automatically and the audio source will
immediate switch to mobile calling mode
automatically.
2.The user can use MIC to talk to the
caller, and the sound of caller will be
heard from the audio source’s left
loudhailer.
3.After the call finished, the audio source
(display) will switch back to former play
mode.
Audio System
44
Operation for accessories
CD changer
CD changer is located at the right side of
the trunk.
CD box
Insert CD
The CD box can insert 6 CDs maximum,
the No.1 CD channel is on the top, and
No.6 CD channel is on the bottom, others
are in sequence.
Changer
box
Eject button
Box cover
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст