Chery B11. Manual — part 148
Chery Eastar Service Manual Body Dimension and Accessories
43
Assemble in the reverse order of disassembly.
Assembling requirements: For the fixing bolts or nuts, their torques shall be M=7±1 N·m. it is required
to ensure that the glass can be able to up and down smoothly and easily after the completion of
assembly and adjustment, without shaking, flapping, shocking and etc. and the electrical requirement:
the time of up/down shall be 3±l s.
Door Exterior Handle and Lock Core
Disassembly and Assembly
l. Unfasten the connecting rod.
2. Unscrew the two fixing bolts.
3. Remove the exterior handle.
Assemble in the reverse order of
disassembly.
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
44
Door Lock and Motor
Disassembly and Assembly
1. Unfasten the connecting rod.
2. Unscrew the three fixing bolts on the door
lock.
3. Remove the door lock, and disconnect the
harness connector.
Assemble in the reverse order of
disassembly.
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
45
Glass Exterior Platen
Disassembly and Assembly
l. Unscrew the bolts.
2. Remove the glass trim plate, glass conduit
and quarter glass.
3. Apply the special tool for clip to push inwards
the clip, and take out the pressing plate
upwards.
Assemble in the reverse order of disassembly.
Disassemble the B Protecting Cover
Remove the weather seal, unscrew the four fixing
bolts and take out the protecting cover.
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
46
Quarter Glass
Disassembly and Assembly
l. Remove the glass up/down.
2. Remove the glass run channel.
3. Unscrew the two fixing bolts of glass rail.
4. Pull forwards the quarter glass to remove the
quarter glass and weather seal
Assemble in the reverse order of
disassembly.
PDF created with pdfFactory Pro trial version
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст