Chery B11. Manual — part 141
Chery Eastar Service Manual Body Dimension and Accessories
13
5. Loosen the air pipe from the fuel tank to canister.
6.
Loosen the fuel pump outlet and oil return pipe.
7.
Unscrew the three fixing bolts on the saddle.
8. Remove the fuel tank, and disconnect the harness
of fuel pump.
Disassemble the fuel tank cap.
Unscrew the two fixing bolts, and remove the fuel
tank cap.
Assemble in the reverse order of disassembly.
Assembling requirements: The assemblage clearance between the fuel tank cap and the body shall be
uniformly (3±0 5) mm. the maximum error of flatness between the edge of cover and the edge of rear
fender is ±0 5 mm, which can’t make an influence on its appearance.
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
14
The assembled fuel tank cap’s radian transition to the body shall be smooth without any defaults that
may affect its appearance. The fuel tank cap shall be assembled and adjusted to its proper position
without looseness and shaking, and the circlip shall have two sections of obvious tightening force
when opening/closing the fuel tank cap. For the fuel tank cap with central door lock, its locking pins
shall be adhered firmly, and the adhering position shall be accurate to ensure that the fuel tank lock
can operate accurately and steadily.
Replacement of Fuel Tank Cap Guy
l.
Remove the bumper moulding of front left
and rear left door.
2. Disassemble the trim of left B column.
3.
Remove the cushioning of rear seat (See
Disassembly of Seat).
4.
Remove the upper trim of spare tire.
5.
Disassemble the trim inside the right boot.
6. Unscrew the two fixing bolts on the fuel tank
handle and loosen the guy.
7. Turn the guy and pull out the fuel tank control
cable.
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
16
Chapter Three Interior Accessories
Disassembly of Roof Lining Cover:
Disassemble the following parts
l.
Remove the weather strip from the door frame.
2.
Remove the A column trim.
3.
Remove the B column trim.
4.
Remove the C column trim.
PDF created with pdfFactory Pro trial version
Chery Eastar Service Manual Body Dimension and Accessories
17
5.
Remove the left/right sun visor.
○
1 Unscrew the three fixing screws on the sun
visor.
② Disconnect the harness, and remove the sun
visor.
6.
Remove the front ceiling lamp (map lamp).
① Open the map lamp cover, and unfasten the
two screws.
PDF created with pdfFactory Pro trial version
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст