Chery Tiggo T11 LHD. Manual — part 84
Maintenance Manual for Chery·Oriental Son
Engine Section
Balance axle front bearing installation
Install front bearing with special tool
Front cover installation
(1)Install special tool on crankshaft front end .
daub oil slightly on the exterior circle
surface of special tool and then install front
cover
(2)Use new front cover oil seal cushion and
install front cover component. Tighten
flange bolt temporarily (Except for oil
cleaner bracket locking bolt)
Balance axle oil seal installation
Press oil seal into front cover with socket
wrench.
MD998705
MD998705
Cylinder
body
Bearing
轴承
MD998285
MD998285
Socket
wrench
Front
cover
Oil seal
油封
Maintenance Manual for Chery·Oriental Son
Engine Section
Maintenance Manual for Chery·Oriental Son
Engine Section
Oil pump oil seal installation
Press oil seal into front cover with socket
wrench.
Crankshaft front oil seal installation
Install crankshaft oil seal on front cover with
special tool.
Oil pump driven/drive gear installation
Daub oil on gear surface and align the
fitting marks.
Daub sealant on oil pressure switch
Daub sealant on oil pressure switch screw
thread parts and then install the said switch
with special tool.
Special sealant: 3M ATV or relevant
equivalents.
Caution:
·Keep the top of screw thread clean
and do not daub sealant.
· Excessive tightening should be
avoided.
socket wrench
Front
cover
前盖
Oil
seal
Oil
seal
Front
cover
MD998375
Fitting
mark
配合标记
Maintenance Manual for Chery·Oriental Son
Engine Section
Flange bolt installation
(1)Insert cross screwdriver into the hole in the
left side of cylinder body and lock balance
axle.
(2)Tighten flange bolt with specified torque to
ensure driven gear of oil pump is fixed on
left balance axle.
Plug installation
(1) Install O-shape ring in front cover slot.
(2) Install plug with special tool and tight it to
specified torque.
Oil pan installation
(1) Keep the fitting surface of oil pan and
cylinder body clean.
(2) Daub 4mm-diameter sealant on the edge
of oil pan flange surface.
Specified sealant:
Mitsubishi pure product MD970389 or
relevant equivalents.
Remarks:
(1) Install oil pan quickly when sealant is
still wet (about 15 minutes)
(2) Do not make the sealed part bedewed
Screwdriver
螺丝刀
MD998162
MD998783
Slot
section
Bolt
hole
section
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст