Chery Tiggo T11 LHD. Manual — part 107
Chery International
Audio
Method of operation
Basic operation
NOTICE:
Please refer to the front view in the
Section “Description” to read this
chapter.
WARNING
Please decrease the volume of sound
prior to turn off the ignition key or the
main power supply.
This machine can
memorize the finial setting value of
volume
prior to shut down the
machine. If the volume is very high
prior to shut down the machine, the
sudden high volume may hurt your
ear or damage your machine when
you startup the machine again.
Even if the main power supply is OFF,
the clock will be displayed so long as
the ignition key is in the ACC
(accessory) or ON (ignition) position.
In some automobiles, when the
ignition key turns to the START
position, the clock isn’t visual
temporarily; and after the engine starts
up, the clock is visual again when the
ignition key returns to the ON position.
Turn ON or OFF power supply
NOTICE:
If the engine of the vehicle doesn’t
start up, you shall take care of the long
time operation of this machine,
because the vehicle will fail to start up
if the battery wears out, what’s more,
the service light of the battery may
shorten due to the long time operation
of this machine.
Press the POWER button to turn on/off
the machine.
Select the mode
1.
Press the FM/AM button to select
the required band.
2.
Press the CD button to select the
CD play mode.
3.
Press the CDC button to select
the CD Cartridge play mode.
45
Chery International
Audio
Adjust the volume
Turn the knob clockwise to increase
the volume; and turn the knob
counterclockwise to decrease the
volume.
The volume range is from 0 (minimum)
to 33 (maximum).
-Please ensure that you still can hear
the traffic signals (whistle, alarm…).
Adjust the bass
1.
Press the SEL button to select
the “BASS”.
2.
Turn this button clockwise to
increase the bass; and turn the
button counterclockwise to
decrease the bass.
*Its value is set as “0” prior to
leave factory.
The range of adjustment: -7 to +7
3.
After the completion of
adjustment, press the SEL button
for a long time to fulfill the
setting.
Adjust the treble
1.
Press the SEL button to select
the “TREB”.
2.
Turn this button clockwise to
increase the treble; and turn the
button counterclockwise to
decrease the treble.
*Its value is set as “0” prior to
leave factory.
The range of adjustment: -7 to +7
3.
After the completion of
adjustment, press the SEL button
for a long time to fulfill the
setting.
Adjust the balance
1.
Press the SEL button to select
the “BAL”.
2.
Turn this button clockwise to
increase the volume of right
speaker; and turn the button
counterclockwise to increase the
volume of left speaker.
*Its value is set as “0” prior to
leaving factory.
3.
After the completion of
46
Chery International
Audio
adjustment, press the SEL button
for a long time to fulfill the
setting.
Adjust the fade
1.
Press the SEL button to select
the “FAD”.
2.
Turn this button clockwise to
increase the volume of front
speaker; and turn the button
counterclockwise to increase the
volume of rear speaker.
*Its value is set as “0” prior to
leave factory.
3.
After the completion of
adjustment, press the SEL button
for a long time to fulfill the
setting.
Loudness function
The loudness effect adds the woofer
and bass to create the natural tone.
This function is automatic.
Operation method of radio
Tune into broadcasting
1.
Press the FM/AM button to select
the Radio mode.
2.
Press the FM/AM button to select
band, and when you press the
FM/AM button, the button will
convert according to the following
sequence:
FM1FM2FM3AMFM1…
。
3.
Press the button 7 or 8 to tune
the radio to find out your required
radio station.
Frequency scanning
The frequency scanning function
enables you to listen to the first 10
seconds of program of each current
band of local radio station.
Press the SCN button to
open/close the frequency
scanning function.
Automatic search
Press the button 7 to tune into
the lower-frequency radio station.
Press the button 8 to tune into
the higher-frequency radio
station.
- Press the button 7or 8 again
47
Chery International
Audio
to search another radio station
Station Search sensitivity (for FM
band only)
The Local/Remote mode switch
is available. The specific method
of operation is as follows:
1.
Press the button SET for at
least 2 seconds to enter the
SETUP menu.
2.
Press the button
or
to select the SRCH option
that you want to change.
3.
Press the button SET to
change the setting LO/DX.
4.
Press the button SET for at
least 2 seconds to exit the
SETUP menu.
Manual tuning
Please switch to the manual tuning
mode, which the specific method of
operation is as follows:
1.
Press the button SET for at
least 2 seconds to enter the
SETUP menu.
2.
Press the button
or
to select the TUN option
that you want to change.
3.
Press the button SET to
change the setting
AUTO/MAN, and set to
MAN.
4.
Press the button SET for at
least 2 seconds to exit the
SETUP menu.
Press the button 7 to tune into
the lower-frequency radio station.
Press the button 8 to tune into
the higher-frequency radio
station.
Automatic storing (AST)
You can store 6 powerful FM radio
stations in the FM AST band or store 6
radio stations in the MW (AM) AST
band. When you use the automatic
storing function, the radio stations that
are originally stored in the FM AST or
MW (AM) AST band will be covered.
Press the button AST to enter the
automatic storing mode,
subsequently,
--The machine give out a sound of
48
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст