Chery QQ6 (S21) / S12LHD. Manual — part 7
25
Chapter 3 Removal and Maintenance of Door
I. Disassembly/Reassembly and Maitenance of Front Door
1. System Composition Diagram
26
2. Preparation
Tools:
right-angled
screwdriver,
cross
screwdriver, 7#, 10# and 13# sleeves, plier.
3. Precautions
3.1 Please wear necessary labor protection
supplies to avoid accidents.
3.2 Power off accumulator to avoid damage the
electrical units.
3.3 Use the correct method to disassemble and
assemble the glass to avoid damage.
4. Disassembly/Reassembly Step
4.1. Unclench the protecting cover of glass
drive switch on the door inner guard plate with
a right-angled screwdriver.
4.2. Pull out the connector from the glass drive
switch by hand..
4.3. Unscrew the fix screws of front door inner
handle with a cross screwdriver.
4.4. Take off the inner handle frame by both
hands.
27
4.5. Separate the inner bar from the inner
handle with a right-angled screwdriver.
4.6. Remove the fix screws from the front door
inner guard plate with a cross screwdriver.
4.7. Lift up the door inner guard plate from the
lower to upper by both hands.
4.8. Directly take out the door inner guard plate
by both hands.
4.9. Tear down front door water-proof plastic
clothing.
28
4.10. Take off the interior set square of the
exterior rear-view mirror by hand.
4.11. Pull out the connector of the exterior
rear-view mirror by hand.
4.12. Remove three fix screws from the exterior
rear-view mirror with a sleeve.
4.13 Remove three fix screws from the exterior
rear-view mirror with a sleeve.
4.14 Take off the exterior rear-view mirror assy
by hand.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст