Chery QQ6 (S21) / S12LHD. Manual — part 134

1.5. Use a flat head screwdriver to pry up the top cover of footrest
plate.







1.6. Use a 10# wrench to remove the footrest plate covers
Installation Torque: 7±1N.m







1.7. Remove the rear seat cushion (See Removal of Seats)
Use a cross head screwdriver to remove the left shield of the rear
seat cushion.







1.8. Take down the vehicle vehicle carpet by hand.

2. Installation Steps

2.1. Put the vehicle vehicle carpet inside the vehicle, and take out
the harness connected with the seats, and then press the vehicle
vehicle carpet besideds the middle passage tightly.





2.2. Keep the seat holes visible.








2.3. Spread the vehicle vehicle carpet till it gets to the footrest plate
and press it tightly.








2.4. Spread the left-rear part of the vehicle vehicle carpet according
to the shape of the vehicle floor, keep the installation holes of the
left-rear seats visible, and spread and press the rear part of the
vehicle vehicle carpet according to the shape of the vehicle floor.

V. Removal of Damping Mat

1. Removal Steps

1.1. Remove the vehicle vehicle carpet (See Removal of Vehicle
Vehicle carpet).

1.2. Take down each damping mat.

2. Installation Steps

2.1. The installation steps are reverse to those for removal.
2.2. Notes: When installing, sort out the harness, and at the same
time the damping mat should fit well with the vehicle body plate
work.

Chapter III Removal & Maintenance of Vehicle Doors

I. Removal, Installation & Maintenance of Front Doors

1. System Constitution Diagram

2. Preparations

Tools: flat head screwdriver, cross head screwdriver, 10#, 13# sleeve, wrench and pliers.