Chery QQ6 (S21) / S12LHD. Manual — part 135

3. Notes

3.1. Please wear necessary labour protection supplies to avoid any
accident.
3.2. Disconnect the battery to avoid damaging the eletrical
equipment.
3.3 Use the correct method to disassemble and assemble the glass to
avoid damage.

4. Removal Steps

4.1. Remove the left-front vehicle door weather strip. The fixing clip
of the vehicle door weather strip are “-” shaped, and when
disassembling it, press the weather strip downward, and then push
the weather strip to one side till you can see part of the clip. And go
on to push it to the opposite direction to show another part of it.
Don’t pull the weather strip vertically so as not to damage the
weather strip.




4.2. Use a flat head screwdriver to pry up the plastic decorative
block fixing the rearview mirror outside the vehicle door.






4.3. Use a 10# sleeve wrench to loosen off the two screws fixing the
outside rearview mirror.







4.4. Pull off the electrically-adjustable outside rearview mirror
harness connector and take off the outside rearview mirror assembly.

4.5. Use a cross head screwdriver to loosen off the four screws that
fix the shield inside the door.






























4.6. Use a cross head screwdriver to loosen off the screw that fixes
the handle inside the vehicle door.






4.7. Use a flat head screwdriver to pry off the plastic cover of the
screw hole for the handle inside the vehicle door, and then remove
the fixing screw with a cross head screwdriver so as to disassemble
the lock assembly inside the door.

4.8. Pull of the vehicle alarm connector.







4.9. Remove the shield inside the door.







4.10. Pull off the power window up-down switch connector.






4.11. Use a cross head screwdriver to loosen off the two screws of
the front door handle fixing mount.





4.11. Tear off the anti-water plastic sheeting on the left-front door.






4.12. Connect the battery and plug in the window up-down switch
plug, lower the window glass to a proper position and loosen off the
two screws that fix the glass.

4.13. Take out the glass carefully.







4.14. Use a 10# sleeve to loosen off the five screws that fix the
window glass up-down regulator.




















4.15. Loosen off the screws, and then pull off the window glass
up-down motor connector to take out the window glass up-down
regulator assembly.