Chery QQ6 (S21) / S12LHD. Manual — part 10
37
3.15. Remove six fixing bolts from the window
glass regulator with a 10# sleeve.
Torque: 7±1 N·m.
3.16. Pull out the connector of window glass
regulator by hand.
3.17. Take off the window glass regulator assy.
3.18. Push aside the fixed mounting of lock
core rod from the door with a right-angled
screwdriver.
3.19. Separate the fixing clips of lock core rod
from the lock by hand.
38
3.20. Take off the lock core rod by hand.
3.21. Separate the upper fixing clips of front
door lock core rod from the lock by hand.
3.22. Separate the lower fixing clips of front
door lock core rod from the lock by hand.
3.23. Loosen the fix screws of front door
exterior handle with a cross screwdriver.
3.24. Take out lock core and handle assy.
39
3.25. Remove three fix screws from the front
door lock with a cross screwdriver.
3.26. Pull out the fastener connector, and then
take off the fastener.
3.27. Remove the fixing bolt from the door
limiter with a 10# sleeve.
Torque: 10±1 N.m
3.28. Remove the other fixing bolt from the
door limiter with a 10# sleeve, and then take off
the door limiter.
Torque: 10±1 N.m
3.29. Loosen two upper fixing bolts of front
door hinge from the door with a 13# wrench.
Torque: 36±4N.m.
40
3.30. Loosen two lower fixing bolts of front
door hinge from the door with a 13# wrench.
Torque: 36±4N.m.
3.31 Pull out the door harness, and then take off
the door body.
4. Installation and Adjustment Step
4.1. The installing steps are reverse to those for
removal.
4.2. Adjustment of door
4.1.1 Rear door clearance can not be adjusted
by hinge adjustment. If the door clearance is
improper, correct the body only to ensure the
clearance.
(See Body Dimension)
4.1.2 Please refer to Front Door Adjustment.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст