Chery QQ6 (S21) / S12LHD. Manual — part 163
29. Removal of the harness butt jointed with the left-rear door
harness.
29.1. Disassemble the left B-pillar inner shield. (See Removal and
Installation of B-pillar Inner Shield)
29.2. Push down the plastic clips that fixes the harness connector
butt jointed left-rear door harness, and then unplug the harness plug
that butt joints the left-rear door harness.
30. Removal of the Interior and right-rear door butt jointed harness
30.1. Disassemble the right B-pillar inner shield. (See Removal and
Installation of B-pillar Inner Shield)
30.2. Unplug the harness plug butt jointed with the interior and
right-rear door.
31. Disassemble the ground wire.
32. Disassemble the screws that fix the BCM module, and then
disassemble the ground wire.
33. Use a cross head screwdriver to remove the left vehicle ceiling
handle, and then disassemble the ground wire.
34. Removal of sunroof controller harness.
34.1. Disassemble the left vehicle ceiling. (See Removal and
Installation of Vehicle Ceiling)
34.2. Remove the sunroof controller harness plug.
(Note: Optional for some vehicle types and the sunroof controller
connectors are reserved for this vehicle type. )
35. Installation of In-door harness. (The steps are reverse to those
for removal)
Section V Removal and Installation of Instrument Panel Harness
I. Harness sketch
Wiper switch
Horn button
Diagnosis
interface
Cigarette lighter
Ground
Instrument
to engine
Outgoing
wire
The bracket should be
fitted together with the
electric box, the torque
is:7±1NM
To instrument
electric box
Wiper relay
The bracket should be
fitted together with the
electric box, the torque
is:7±1NM
Blower relay
Turning relay
Left loudspeaker
Cluster gauge
Fog light switch
Nightlight switch
Brake switch
Antenna power
Blower relat
Blower power
Air
conditioner
speed resistor
Air
bag
connector
Ground
Blower switch
Air
conditioner
switch
Alarm
switch
Instrument
to engine
Instrument
to interior
Dimmer
turning switch
Instrument
to interior
Rear
wiper
handle switch
Headlight
switch
Ignition
switch
Anti-theft
module
Audio
Air
conditioner
thermostat
I/O
circulation
motor
Right loudspeaker
Instrument
to
front
compartment
Instrument
to
front
compartment
Wiper
switch
Horn
button
II. Instructions on Main Connectors
No
Connector Name
Pins
Connection
1
Instrument to interior
2
Anti-sheft module →instrument to
engine
3
Ground
4
——
5
Ground
6
Fog lights →c200 (instrument to
interior )
7
C200 (instrument to interior )
8
——
9
C209 (instrument to engine)
10
C209 (instrument to engine)
11
Instrument electric box
12
Instrument to interior (c200)
13
Ignition switch (IGN1)
14
C100 (instrument to front
compartment )
15
Trouble diagnosis socket
16
C209 (instrument to engine)
17
Air bag
18
C209 (instrument to engine)
19
C200 (instrument to interior )
20
C209〔instrument to engine〕
21
C200 〔instrument to interior 〕
22
Headlight switch
23
C209 (instrument to engine)
24
Headlight switch
25
C100〔instrument to front
compartment 〕
26
C100〔instrument to front compartment
27
C209〔instrument to engine〕
28
Instrument electric box
29
——
30
C209〔instrument to engine〕
31
Air bag
1
Combination instrument
connector
32
Fog lights switch →instrument to
front compartment
1
Audio system
C200 (instrument to interior )
2
Left loudspeaker
connector
C200(instrument to interior )
Audio system
1
Ground
2
——
3
C100 〔instrument to front
compartment〕
4
C200(instrument to interior )
3
Fog light switch
connector
5
C200 (instrument to interior )
6
——
7
——
8
——
9
Headlight switch
Instrument electric box
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст