Chery QQ6 (S21) / S12LHD. Manual — part 161

III. Removal and Installation of In-door harness

Part number: S12-3724050

(I). Preparations

Tools: sleeve wrench, cross head screwdriver, flat head screwdriver

(II). Notes

When disassembling the electrical components and harness, make
sure to disconnect the power supply.
The ignition switch must be OFF.

(III). Removal Steps

1. Removal of license plate light harness.

1.1. Disassemble the rear bumper assembly. (See Removal and
Installation of Rear Bumper)
1.2. Unplug the plug of the license plate light harness.







2. Removal of left-rear group tail Llights harness

2.1. Disassemble the left-rear group tail lights assembly. (See
Removal and Installation of Left-rear Combination Tail Lights)
2.2. Unplug the plug of the left-rear combination tail lights harness.








3. Use a flat head screwdriver to pry off the luggage light, and
unplug the luggage light harness.

4. Unplug the plug of the left-rear speaker harness.











5. Removal of fuel pump harness.

5.1. Pull off the right-rear seat, and take down the plastic cover on
the fuel pump.
5.2. Unplug the fuel pump harness plug.






6. Unplug right-rear speaker harness plug.









7. Disassemble the right-rear combination tail light harness.

7.1. Disassemble right-rear combination tail lights assembly. (See
Removal and Installation of Right-rear Combination Tail Lights )
7.2. Unplug the right-rear combination tail lights harness plug.

8. Removal of BCM MODULE.

８.１. Open BCM module box.
８.２. Unplug the BCM module A plug.







８.３. Unplug the BCM Module B plug.









９. Removal of hand brake harness

９.１. Disassemble the auxiliary Instrument Panel assembly. (See
Removal and Instalaltion of Auxiliary Instrument Panel)
９.２. Unplug the hand brake harness plug.








10. Removal of ceiling light harness.

10.１. Disassemble the ceiling light. (See Removal and Installation
of Ceiling Light)
10.２. Unplug the ceiling light harness plug.

11. Unplug the seat belt switch harness plug.









12. Removal of instrument harness butt joint

12. １ . Disassemble the Instrument Panel. (See Removal and
Installation of Instrument Panel )
12.２. Unplug the instrument harness butt joint.







13. Removal of instrument harness butt joint

13. １ . Disassemble the Instrument Panel. (See Removal and
Installation of Instrument Panel)
13.２. Unplug the instrument harness butt joint.






14. Removal of front compartment harness connector.

14. １ . Disassemble the Instrument Panel. (See Removal and
Installation of Instrument Panel)
14.２. Unplug the front compartment harness plug.