Chery QQ6 (S21) / S12LHD. Manual — part 162
15. Removal of left-rear wheel ABS sensor harness
15.1. Raise the vehicle by hoister. (Take care of your safety)
15.2. Unplug the left-rear wheel ABS sensor connector.
16. Removal of right-rear wheel ABS sensor harness.
16.1. Raise the vehicle by hoister. (Take care of your safety)
16.2. Unplug the right-rear wheel ABS sensor connector.
17. Removal of reverse radar power harness
17.1. Use a cross head screwdriver to remove the left C-pillar inner
shield.
17.2. Unplug the reverse radar power plug.
18. Removal of the tail door harness’ butt jointed harness.
18.1. Disassemble the left C-pillar inner shield.
18.2. Unplug the tail door harness’ butt jointed harness.
19. Disassemble the ground.
20. Removal of right-rear door contact switch harness
20.1. Open the right-rear door and disassemble the crews that fix the
contact switch with a cross head screwdriver, and then take off the
right-rear door contact switch.
20.2. Unplug the right-rear door contact switch plug.
21. Removal and removal of left-rear door contact switch harness
21.1. Open the left-rear door and disassemble the crews that fix the
contact switch with a cross head screwdriver, and then remove
left-rear door contact switch.
21.2. Unplug the left-rear door contact switch plug.
22. Disassemble the rigth C-pillar inner shield and then disassemble
the ground wire.
23. Removal of left-front door harness butt joint 1.
23.1. Disassemble the left A-pillar inner shield, and push down the
plastic lock that fixed the connector of the left-front door harness
butt joint 1. (See Removal of A-pillar inner shield )
23.2. Unplug the plug of the left-front door harness butt joint 1.
24. Removal of the left-front door harness butt joint 2.
24.1. Disassemble the left A-pillar inner shield, push down the
plastic lock that fixes the connector of left-front door harness butt
joint 2. (See Removal of A-pillar Inner Shield)
24.2. Unplug the plug of left-front door harness butt joint 2.
25. Removal of interior and right-front door butt joint 1.
25.1. Disassemble the right A-pillar inner shield, and push down the
plastic lock that fixes the right-front door harness butt joint 2. (See
Removal of A-pillar Inner Shield)
25.2. Unplug the plug of right-front Door harness butt joint 1.
26. Removal of interior and right-front door butt joint 2.
26.1. Disassemble the right A-pillar inner shield, push down the
connector plastic lock that fixes the right-front door harness butt
joint 2. (See Removal of A-pillar Inner Shield).
26.2. Unplug the plug of Right-front Door harness butt joint 1.
27. Removal of right-front door contact switch harness.
27.1. Use a cross head screwdriver to loosen off the screws that fix
the right-front door contact switch, and then remove the right-front
door contact switch.
27.2. Unplug the right-front door contact switch plug.
28. Removal of left-front door contact switch harness.
28.1. Use a cross head screwdriver to loosen off the screws that
fixes the left-front door contact switch, and then remove the
left-front door contact switch.
28.2. Unplug the left-front door contact switch plug.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст