Chery QQ6 (S21) / S12LHD. Manual — part 143

1.7. Use a 8# sleeve wrench to loosen off the four fixing bolts that
connect the audio system with the Instrument Panel.

















1.8. When taking out the audio system, unplug the antenna and
harness.












1.9. Use a cross head screwdriver to loosen off the two screws that
connect the cup-holder and the Instrument Panel, and then take out
the cup-holder.

1.10. Disassemble the auxiliary Instrument Panel (See Chapter I
Removal, Installation & Adjustment of of the Brake System).

1.11. Use a cross head screwdriver to pry open the decoration sheet
on the ash tray and take it out.








1.12. Use a cross head screwdriver to loosen off the four screws that
connect the cigarette lighter with the Instrument Panel, and unplug
the harness when removing the lighter.


















1.13. Use a cross head screwdriver to loosen off the three screws
that connects the ashtray with the Instrument Panel and take out the
ashtray.


Note: When disassembling the console, the operations should be
carried out from top to bottom, and you should disassemble the
air-conditioner switch before disassembling the audio system.

1.14. Disassemble the steering wheel, combination switches and
ignition switch.


1.15. Use a cross head screwdriver to loosen off the two screws on
the instrument panel shield and the Instrument Panel, and then pull it
out with both hands.















1.16. Use a cross head screwdriver to loosen off the four screws on
the instrument panel and the Instrument Panel.










1.17. Use a flat head screwdriver to pry up the red clip and the
instrument panel harness plug can be taken out before the instrument
panel is taken out.

1.18. Push out the two harness plugs from behind the fog light
switch.
















1.19. Disassemble the left-front and the right-front door seal strip.







1.20. Disassemble the decorative shields of the left and righte
A-pillars (See Removal of Vehicle Ceiling for details).

1.21. Open the storage box to the lower right of the Instrument
Panel, use a cross head screwdriver to loosen off the four screws on
the storage box and disassemble the storage box.






1.22. Disassemble the front hood cord switch (See Removal of Front
Hood & Trunk ).

Была ли эта страница вам полезна?
Да!Нет
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности