Chery QQ6 (S21) / S12LHD. Manual — part 141

5. Removal and Installation of Front Ceiling
light

5.1. Removal Steps

5.1.1. Align a flat head screwdriver with the groove along the ceiling
light edge to pry it open, as shown in the figure:
Note: Do not scratch part surface.






5.1.2. Remove the three fixing screws of the the front ceiling light.
Torque: 1.5±0.5Nm








5.1.3. Unplug the harness and disassemble the front ceiling light
assembly.

5.2. Installation Steps

The installation steps are reverse to those for removal.

6． Removal and Installation of Reverse Radar
Display

6.1. Removal Steps

6.1.1. Use a cross head screwdriver to loosen off the screws of the
reverse radar display.





6.1.2. Unplug the harness and remove the reverse radar display.

6.2. Installation Steps

The installation steps are reverse to those for removal.

7. Removal and Installation of A-pillar Shield

7.1. Removal Steps

7.1.1. Use a flat head screwdriver to pry open the weather strip of
the left A-pillar shield, and then take out the left A-pillar shield by
hand.





7.1.2. Take out the left A-pillar shield.

7.1.3. Follow the the removal steps of the right A-pillar shield for
that of the left one.

7.2. Installation Steps

The installation steps are reverse to those for removal.

8. Removal and Installation of B-pillar Shield

8.1. Removal Steps

8.1.1. Disassemble the shield below the left B-pillar (See Removal
and Installation of Seat belt).







8.1.2. Use a flat head screwdriver to pry open the B-pillar shield.
Note: protect the trim part surface from scratching.









8.1.3. Follow the removal steps of the left B-pillar shield for
removal of the right B-pillar shield.

8.2. Installation Steps

The installation steps are reverse to those for removal.

9. Removal and Installation of C-pillar Shield

9.1. Removal Steps

9.1.1. Use a sleeve wrench to loosen off the seat belt bolts (See
Removal and Installation of Rear Seats & Seat belts).







9.1.2. Use a flat head screwdriver to pry open the C-pillar upper
shield.








9.1.3. Remove the C-pillar upper shield.











9.1.4. Please follow the removal steps of left C-pillar upper shield
for that of the right C-pillar upper shield.

9.2. Installation Steps

The installation steps are reverse to those for removal.