Chery QQ6 (S21) / S12LHD. Manual — part 142

10. Removal and Installation of Vehicle Ceiling

10.1. Removal Steps

10.1.1. Disassembling the left/right front sun visors. (See Removal
and Installation of Sun Visor)

10.1.2. Disaasembling the front ceiling light. (Refer to removal and
installation of front ceiling light)

10.1.3. Disassembling all interior ceiling armrests. (See removal and
installation of ceiling armrest)

10.1.4. Disassembling A/B/C-pillar shield. (See removal and
installation of A/B/C-Pillar Shield)

10.1.5. Use a flat head screwdriver to loosen off the vehicle ceiling
clip (4 in all).



















10.1.6. Disassemble the four doors’ weather strip by hand.

10.1.7. Open the trunk and disassemble the vehicle ceiling.

10.2. Installation Steps

The installation steps are reverse to those for removal.

Chapter VII Removal and Installation of Instrument Panel &

Instrument Panel Crossbeam

I. Removal of Instrument Panel

Tools: 8 #sleeve, extension bar, 飞扳[MS1], cross head screwdriver,
flat head screwdriver, etc.

1. Removal Steps

1.1. Open the storage box over the console, and use a cross head
screwdriver to loosen off the two screws. Then use a flat head
screwdriver to pry open the storage box. See the right figure:

1.2. Use a cross head screwdriver to loosen off the two screws than
connect the emergency switch with the Instrument Panel, as shown
in the figure:

1.3. Pull out the top part by hand, and then use a flat head
screwdriver to pry open the lower part. Unplug the harness when
removing it, as shown in the figure:

1.4. Use a flat head screwdriver to pry open the control panel of the
airconditioner switch and take it out.

1.5. Use a cross head screwdriver to loosen off the four screws that
connect the airconditioner switch and the Instrument Panel.

1.6. When taking the airconditioner switch, unplug the two harness
plugs behind it and disassemble the two cables behind the switch.