Chery A15. Manual — part 203
Chery A15 Maintenance Manual
Chapter Ten Seat Frame
I. Front seat
Disassembling and installing
1. Move the front seat forward. Remove
the rear brake. Loosen the set bolt for
the adjuster and remove the guide rail.
2. Loosen the nut and take out the
locking bolt.
3. Loosen the seat adjuster rod. Move
the seat backward to disengage it from
the guide rail.
4. Electricity lines for the seat safety belt
5. Guard board for the seat slide
Installing procedures are in the
reversed order. Tightening torque for
the limit screw is 2.5±0.5N·m. Location of
front right/left seat in the complete
vehicle should enable space between the
front seat and the rear seat to be 740±20mm.
Chery A15 Maintenance Manual
II. Headrest
Disassembling and installing
Draw the headrest upward until it
reaches the side lever contact. Disassemble
with screwdriver the fixing clamp between the
headrest side lever and the guide groove on the
rear side of the seat back.
When installing, bear in mind the position of
Spring clamp, mount it before inserting the headrest
side lever.
III. Rear seat
Disassembling and installing.
1. Pull out the rear adjuster control
rod and disengage the seat. Fold the rear
seat forward.
2. Remove the protection lid between
the cushion and the set bolts on the
vehicle floor.
3. Loosen the set screw between the
Seat at the rear beam and the vehicle floor.
Installing procedures are in the
reversed order. Tightening torque for
the screw of cushion assembly is 2.5±0.5mm.
IV. Dismountable rear seat
Overall or partial disassembling and
installing
Pull upward the adjuster control rod of the
rear seat until it is disengaged from the
Chery A15 Maintenance Manual
front folded part of the seat.
Remove the protection lid of the
set bolt between the seat and the
car.
Loosen the set bolts on corresponding
positions on the rear beam of the vehicle.
Installing procedures are in the
reversed order.
V. Fixture on top of rear seat back
Disassembling and installing
Loosen the set bolt of the fixture
piston pin
Installing procedures are in the
reversed order.
Chery A15 Maintenance Manual
Chapter One: Axle and Suspension System
Axles and suspension system ensure the normal running of vehicles by receiving the
torque transferred through transmission system from the engine and making use of the
traction on vehicle by road surface through the adhesion between driving wheels and
the road surface. They also relieve the vehicle body from the impact and vibration
from road surface by transferring and receiving all counterforces applied on wheels by
road surface, thus ensuring the smoothness and stability of vehicle operation.
Section One: Maintenance of Front Axle and Front Suspension
I. Structure of Front Axle and Front Suspension
Front suspension consists of subframe, antiroll bar and control arm, etc., as shown in
the figure below.
29
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст