Chery A11. Manual — part 54
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Remove all locking bolt, and clean housing.
-63-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
3、Assembling
3.1、Assembling transmission housing and parking system.
If necessary, install lug 01 250, and fix with hex bolts.
Tool: 13# socket
Torque: 23Nm
When assembling bolts, use new sealing washer.
-64-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Part number
Name
Dimensions
Torque (Nm)
01022 Locking
bolt
M14×1.5
40
01020 Sealing
ring
A14×18
—
01270 Locking
bolt
M10×1
15
01260 Sealing
ring
A10×14
—
Installing back light switch 01 112 with use new
sealing washer 01 116.
Tool: 27# socket
Torque: 4-Nm
Knock ventilation fitting 01 110 into the case
with a plastic hammer.
-65-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Preheat to 70℃, and press bearing outer race 09
090 and 09 040 into the housing.
Install driven bearing outer race properly, and
adjust its position in the housing. Otherwise the
mounting bolt can not be aligned with threaded
holes.
Install two bearing outer race mounting bolts 09
100, and replace the sealing washer 09 104 with
new one.
Tool: 45#
socket spanner
Torque: 20Nm
-66-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст