Chery A11. Manual — part 57
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
After bending brake band with pressure, install it
into housing, and adjust position between the
brake band and two plungers.
-75-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
3.3、Assembling brake D and 1
st
one-way overrun clutch
Install O-rings 17 020 and 17 030 in piston 17.
010, and apply lubricant. Build piston into the
housing with flange part upward.
-76-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Install diaphragm spring 17 040and thrust washer
17 090.
Install one-way overrun clutch 17 130 into the
clutch outer gear ring, USE CARE to right tooth
match, and push clutch downwards to stop.
Install retainer ring 17 140, and retain with snap
ring 17 150.
-77-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Install clutch hub 17 180 half or so, and then turn
clockwise to location.
Place clutch on special tool 5×46 000 232, and
install snap ring 17 100 with installing drift pin 5
×46 000 243.
Install 1st gear one-way overrun clutch into
housing. Turn over differential by 90℃. Ensure
one-way overrun clutch is not out of the position.
-78-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст