Chery SQR 7160 sedan. Manual — part 66
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Place spring 31 430 on piston.
After oiling O-ring, mount whole piston into the
housing.
Place 2 O rings 31 470 on brake fluid hydraulic
cylinder cap and apply oil or Vaseline, and then
install cylinder cap.
Press cylinder cap using special tool 5 X 46 000
295, and then install snap ring.
Remove the special tool.
-74-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
After bending brake band with pressure, install it
into housing, and adjust position between the
brake band and two plungers.
-75-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
3.3、Assembling brake D and 1
st
one-way overrun clutch
Install O-rings 17 020 and 17 030 in piston 17.
010, and apply lubricant. Build piston into the
housing with flange part upward.
-76-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Install diaphragm spring 17 040and thrust washer
17 090.
Install one-way overrun clutch 17 130 into the
clutch outer gear ring, USE CARE to right tooth
match, and push clutch downwards to stop.
Install retainer ring 17 140, and retain with snap
ring 17 150.
-77-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст