Chery SQR 7160 sedan. Manual — part 51
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
1.3.5、Differential Pretension
Install adjustor 5P 95 000 286 and tighten to
7Nm, pressing bearing and outer race.
As shown on fig., turn the housing clockwise,
tighten to 7Nm and repeat the above procedures.
As shown on fig., using depth gauge measuring
distance A from bearing outer race to clutch
housing surface.
.For example
Distance A = 10.2mm
-14-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
As shown on fig., distance B is the height from
lug in speedmeter drive gear housing to housing
top.
For example
Distance B = 8.65mmm
Pretension washer thickness is within 0.1mm to
0.15mm.
Washer thickness is determined by following
formula:
Dimension A – dimension B + washer thickness
= S
For example
10.2mm – 8.65mm + 0.1mm = 1.65mm
NOTE:
According to the calculated result, select
different thickness washer combination to obtain
the most approximate combination.
-15-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
1.3.6、Brake band C pretension
Apply lubricant on locating rod of brake band,
Adjusting bolt tighten torque is 10Nm.
Tool: 6# socket spanner
NOTE:
While tightening the brake band, place the
locating rod to proper installation position.
Make marks on bolts and housing, then turn the
adjusting bolt counterclockwise (about 3mm).
Tighten locking nut to 80 Nm.
Tool is 23# cotter spanner.
-16-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
1.3.7、Adjusting throttle cable
Pull the throttle cable to the most length,
Measure as shown on figure. And the measuring
value cannot be more than 39mm; otherwise, it
will affect the kick down function.
-17-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст