Jaguar XJ (X350). Manual — part 294
Assembly
1
.
CAUTION: Make sure the potentiometer sliders are correctly located.
Failure to follow this instruction may result in component damage.
Install the tilt/telescopic motor.
•
Reposition the tilt/telescopic motor to the steering column.
2 . Install new telescopic housing retaining bolts.
•
Tighten to 8 Nm.
3 . Install the supplied spacer between the tilt/telescopic motor and steering column.
4 . Install a new tilt/telescopic motor retaining pin and washers.
5 . NOTE:
Install new tilt solenoid retaining bolts.
Install the tilt solenoid.
•
Tighten to 1 Nm.
•
Attach the tilt solenoid wiring harness.
6 . NOTE:
Install new telescopic solenoid retaining bolts.
Install the telescopic solenoid.
•
Tighten to 1 Nm.
•
Install a new retaining strap.
www.
7 . Install the steering column electrical connector housing.
•
Connect the electrical connectors.
8 . Attach the steering column electrical connector housing.
9 . Attach the wiring harness.
10 . Install the Steering Column Lock Actuator.
211-05 :Steering Column Switches
Description and operation
Steering Column Switches
Item
Part Number
Description
1
Trip Button
2
Side Lamps/Head Lamps/Auto Lamps and Exit Delay Collar
3
Direction Indicator/Main Beam Switch
4
Wiper Switch
5
Intermittent Wipe Time Delay Collar
6
Wash/Wipe Button
The multifunction switch is situated on the steering column and consists of the wiper switch and the
direction indicator/main beam switch.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст