Jaguar XJ (X350). Manual — part 292
5 . Detach the lower steering column shaft from the upper steering column.
6 . Remove the lower steering column support bearing retaining nuts.
7 . Remove the lower steering column.
Installation
1 . To install, reverse the removal procedure.
Tighten to 9 Nm.
2 . Tighten to 35 Nm.
3 . Tighten to 35 Nm.
4 . Carry out the lower steering column setting procedure.
www.
Steering Wheel (57.60.01)
Special Service Tools
Locking Tool
211-326
Removal
1 . Remove the driver air bag module.
For additional information, refer to
Driver Air Bag Module (76.73.39)
2 . Disconnect the electrical connector.
3
.
CAUTION: Position the front wheels in a straight ahead position and centralize
steering wheel. Failure to follow this instruction may result in damage to the clockspring.
CAUTION: Make sure no damage is occured to the electrical connectors. Failure to
follow this instruction may result in damage to the vehicle.
Remove the steering wheel.
4
.
CAUTION: Failing to install the special tool to the clockspring may result in damage
to the vehicle.
CAUTION: Do not allow the clockspring to unwind.
Install the special tool to the clockspring.
Installation
1 . To install, reverse the removal procedure.
2
.
CAUTION: Make sure that the arrow on the cassette is centered and pointing
vertically prior to the steering wheel installation. On removal of the special tool, keep the
clockspring cables taught to prevent the cassette moving from the set position. Do not
allow the clockspring to unwind. Failure to follow this instruction may result in damage to
the component.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст