Jaguar XJ (X350). Manual — part 618

2 . NOTE:

Make sure the retaining clip is fully installed.

Attach the thermostat and hose assembly.

3 . Attach the coolant hose.

4 . Install the coolant expansion tank.

For additional information, refer to Coolant Expansion Tank (26.15.01)

5 . Attach the transmission cooler hose.

6 . Attach the coolant hoses.

7 . Install the charge air cooler inlet elbow.

Tighten to 7 Nm.

8 . Attach the charge air cooler inlet hose.

9 . Install the air cleaner.

For additional information, refer to Air Cleaner (19.10.05)

10 . Fill the cooling system.

For additional information, refer to Cooling System Draining, Filling and Bleeding

www.

Water Pump (26.50.01)

Special Service Tools

Accessory belt detensioner

303-703

Removal

1 . Disconnect the battery ground cable.

For additional information, refer to Battery Disconnect and Connect

2 . Remove the air cleaner.

For additional information, refer to Air Cleaner (19.10.05)

3 . Drain the cooling system.

For additional information, refer to Cooling System Draining, Filling and Bleeding

4 . Remove the air deflector.

For additional information, refer to Air Deflector (76.11.41)

5 . Detach the accessory drive belt.

1) Using the special tool, rotate the belt tensioner counter clockwise.

2) Detach the accessory drive belt.

6 . NOTE:

Discard the water pump pulley retaining bolts.

Remove the water pump pulley.

Using a suitable 6mm bar, retain the water pump pulley.

7

.

CAUTION: Reposition the accessory drive belt to prevent contamination from the

coolant. Failure to follow this instruction may result in damage to the vehicle.

Reposition the accessory drive belt.

www.