Jaguar XJ (X350). Manual — part 619
8 . NOTE:
Discard the water pump O-ring seal.
Remove the water pump.
Installation
1 . NOTE:
Install a new O-ring seal.
Install the water pump.
Tighten to 10Nm.
2 . Align the accessory drive belt.
3 . NOTE:
Install new water pump pulley retaining bolts.
Install the water pump pulley.
Using a suitable 6mm bar, retain the water pump pulley.
Tighten to 24 Nm.
Align the accessory drive belt.
4 . Attach the accessory drive belt.
1) Using the special tool, rotate the belt tensioner counter clockwise.
2) Attach the accessory drive belt.
www.
5 . Fill the cooling system.
For additional information, refer to Cooling System Draining, Filling and Bleeding
6 . Install the air deflector.
For additional information, refer to Air Deflector (76.11.41)
7 . Install the air cleaner.
For additional information, refer to Air Cleaner (19.10.05)
8 . Reconnect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
303-04A : Fuel Charging and Controls – 3.0L
Specifications
Specifications
Torque Specifications
Description
Nm lb-ft lb-in
Lower intake manifold retaining bolts
10 -
89
Fuel injection supply manifold retaining bolts
10 -
89
Fuel pressure sensor
10 -
89
Throttle body
10 -
89
Fuel pressure sensor bracket retaining bolts, lower 10 -
89
Fuel pressure sensor bracket retaining bolts, upper 6
-
53
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст