Jaguar XJ (X350). Manual — part 1067
Vehicles with 3.5L or 4.2L engine
11 . Remove the transmission fluid cooler tube retaining bracket.
All vehicles
12 . Remove the transmission fluid cooler tube retaining bracket.
13 . Remove the transmission fluid cooler pipes.
1) Remove the retaining bolt.
2) Remove the retaining plate.
3) Remove the transmission fluid cooler pipes.
Allow the transmission fluid to drain into a suitable container.
Installation
All vehicles
1 . Install the transmission fluid cooler tubes.
1) Install the transmission fluid cooler tubes.
2) Install the retaining plate.
3) Install the retaining bolt .
Install new O-ring seals.
Tighten to 23 Nm.
2 . Install the transmission fluid cooler tube retaining bracket.
Vehicles with 3.5L or 4.2L engine
3 . Install the transmission fluid cooler tube retaining bracket.
1) Tighten to 10 Nm.
www.
Vehicles with 3.0L engine
4 . Install the power steering pump to steering gear pressure line retaining nut.
Tighten to 10 Nm.
5 . Install the transmission fluid cooler tube retaining bracket.
Tighten to 10 Nm
6 . Attach the transmission fluid cooler tube retaining bracket.
All vehicles
7 . Install the air deflector.
8 . Install the radiator splash shield. <<501-02>>
9 . Lower the vehicle.
10 . Connect the transmission fluid cooler tubes.
Install new O-ring seals.
Tighten to 20 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст