Jaguar XJ (X350). Manual — part 64

Installation

1 . NOTE:

Apply water to lubricate the bushing.

Using the special tools install the stabilizer bar link bushing.

2 . Install the rear lower arm.

For additional information, refer to

Upper Arm LH (60.35.41)

Removal

1 . Remove the air spring assembly.

<<204-05>>

2 . Remove the cowl vent screen access panel.

3 . Remove the upper arm rear retaining nut.

4

.

Remove the air cleaner assembly. For additional information, refer to

<<303-12A>>

or

<<303-

12B>>

5 . Remove the upper arm front retaining nut.

www.

6 . NOTE:

Note the position of the upper arm retaining bolt locating tangs to aid installation.

Remove the upper arm.

Installation

1

.

CAUTION: Make sure the upper arm retaining bolt locating tangs are correctly

located. Failure to follow this instruction may result in damage to the vehicle.

Install the upper arm.

2 . Install the upper arm front retaining nut.

3 . Install the upper arm rear retaining nut.

4 . Install the air spring assembly.

<<204-05>>

5

.

NOTE:

The final tightening of the Upper arm retaining nut must be carried out with the vehicle

on its wheels.

Tighten to 47 Nm.

www.