Jaguar XJ (X350). Manual — part 603
2 . Tighten to 5 Nm.
3 . Tighten to 3 Nm.
4 . Fill the cooling system.
For additional information, refer to Cooling System Draining, Filling and Bleeding
Water Pump - 3.5L/4.2L, Vehicles Without:
Supercharger (26.50.01)
Removal
1
.
Remove fuse 14 from the engine compartment fuse box prior to performing any under hood
service in the area of the cooling fan.
2 . Drain the cooling system.
For additional information, refer to
3 . Lower the vehicle.
4 . Remove the air cleaner outlet tube. <<303-12B>>
5 . Loosen the water pump pulley bolts.
6
.
Detach the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt
tensioner.
2) Detach the accessory drive belt.
www.
7 . Remove the water pump pulley.
Discard the water pump pulley retaining bolts.
8 . Remove the water pump.
Installation
1 . To install, reverse the removal procedure.
Install a new water pump gasket and O-ring seal.
2 . Tighten to 8 Nm + 90°.
3 . Tighten to 10 Nm + 45°.
Install new retaining bolts.
4 . Fill the cooling system.
For additional information, refer to
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст