Jaguar XJ (X350). Manual — part 1220
17 . Raise the vehicle.
18 . Remove the engine mounting and bracket assembly.
19 . Disconnect the A/C compressor electrical connector.
20 . Detach the A/C compressor return line.
Remove and discard the A/C compressor O-ring seal.
Cap the exposed port.
21 . Detach the A/C compressor supply line.
Remove and discard the A/C compressor O-ring seal.
Cap the exposed port.
22 . Remove the A/C compressor.
www.
Installation
All vehicles
1 . Install the A/C compressor.
Tighten to 25 Nm.
2 . NOTE:
Un-cap the exposed ports.
Install new A/C compressor O-ring seals.
Lubricate the new O-rings with A/C refrigerant oil.
3 . Clean off any oil residue that may contain A/C system flourescent dye.
4 . Connect the A/C compressor supply line.
Tighten to 20 Nm.
5 . Connect the A/C compressor return line.
Tighten to 20 Nm.
6 . Connect the A/C compressor electrical connector.
7 . Install the engine mounting and bracket assembly.
Tighten to 25 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст