Jaguar XJ (X350). Manual — part 1219

1) Rotate the accessory drive belt tensioner counter-clockwise.

Use a 3/8 inch square drive bar to rotate the accessory drive belt

tensioner.

2) Detach the accessory drive belt.

Vehicles without supercharger

5

.

Remove the throttle body.

For additional information, refer to Throttle Body - 4.2L NA V8 - AJV8/3.5L NA V8 - AJV8, VIN

Range: G45704->G99999 (19.70.04)

All vehicles

6 . NOTE:

Vehicles without supercharger shown, vehicles with supercharger similar.

Install the special tools.

Vehicles without supercharger shown, vehicles with supercharger similar.

Install the special tool.

8 . NOTE:

Vehicles with supercharger shown, vehicles without supercharger similar.

Using the special tool, raise the engine to a suitable height.

1) Adjust the engine support beam (clockwise).

2) Raise the engine to a suitable height.

7 . NOTE:

www.

9 . Remove the left-hand front wheel and tire assembly.

For additional information, refer to Wheel and Tire (74.20.05)

10 . Remove the air deflector.

For additional information, refer to Air Deflector (76.11.41)

Left-hand drive vehicles

11 . Remove the steering gear shaft pinch bolt.

12 .

CAUTION: The steering gear must be supported at all times.

Detach the steering gear.

13 .

CAUTION: The steering gear must be supported at all times.

Using suitable tie straps, secure the steering gear.

All vehicles

14 . Remove the left-hand engine mounting lower retaining nut.

15 . Lower the vehicle.

16

.

NOTE:

Vehicles with supercharger shown, vehicles without supercharger similar.

Lift the engine to a suitable height to access the A/C compressor retaining bolts.

1) Adjust the engine support beam.

2)

Lift the engine to a suitable height to access the A/C compressor retaining

bolts.

www.