Jaguar XJ (X350). Manual — part 177

Installation

1

.

WARNING: Do not use compressed air to disperse brake dust into the atmosphere.

CAUTION: If the pistons are pushed back into the housing, brake fluid will be forced

back into the brake fluid reservoir.

CAUTION: Make sure the brake disc faces are clean before installation.

CAUTION: Brake pads must always be replaced in axle sets.

To install, reverse the removal procedure.

Using a suitable tool, fully retract the brake caliper pistons.

Install a new brake caliper lower retaining bolt.

Tighten to 34 Nm.

www.

Brake Pads - Vehicles With: Standard
Brakes, VIN Range: G45704->G99999
(70.40.02)

Removal

1 . Remove both front wheels and tires.

For additional information, refer to

Wheel and Tire (74.20.05)

2 . NOTE:

Left-hand shown, right-hand similar.

Remove the anti-rattle spring.

3 . NOTE:

Left-hand shown, right-hand similar.

Remove the brake caliper retaining bolt dust covers.

4

.

CAUTION: Do not allow the brake caliper to hang on the hydraulic hose, as this will

damage the hose. Failure to follow this instruction will result in damage to the hose.

NOTE:

Left-hand shown, right-hand similar.

Remove the brake caliper retaining bolts.

5

.

CAUTION: Do not allow the brake caliper to hang on the hydraulic hose, as this will

damage the hose. Failure to follow this instruction will result in damage to the hose.

NOTE:

Left-hand shown, right-hand similar.

Detach the brake caliper.

6

.

CAUTION: Do not allow the brake caliper to hang on the hydraulic hose, as this will

www.