Jaguar XJ (X350). Manual — part 1226
Lubricate the new O-ring seal with A/C refrigerant oil.
Tighten to 5 Nm.
3 . NOTE:
Install a new O-ring seal.
NOTE:
Lubricate the new O-ring seal with A/C refrigerant oil.
Tighten to 5 Nm.
4
.
Carry out the A/C system evacuation and charging procedure.
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and
Charging (82.30.30)
NOTE:
Desiccant Bag - 4.2L NA V8 - AJV8/4.2L SC
V8 - AJV8/3.0L NA V6 - AJ27/3.5L NA V8 -
AJV8 (82.17.03)
Installation
1 . Install new desiccant bag retaining screw O-ring seals.
Lubricate the new O-ring seals with A/C refrigerant oil.
2
.
CAUTION: Do not leave the desiccant bag exposed to atmosphere for longer than
five minutes.
Install the desiccant bag.
3 . NOTE:
Un-cap the exposed port.
Install the retaining screw.
Tighten to 22 Nm.
4 . Clean off any oil residue that may contain A/C system flourescent dye.
www.
5 . Install the radiator lower cowl.
6 . Install the radiator splash shield. <<501-02>>
7 . Lower the vehicle. <<100-02>>
8 . Carry out the A/C system evacuation and charging procedure. <<412-00>>
9 . Carry out the A/C system flourescent dye leak detection procedure. <<412-00>>
Desiccant Bag - 2.7L V6 - TdV6 (82.17.03)
Removal
1
.
Carry out the air conditioning (A/C) system recovery procedure.
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and
Charging (82.30.30)
2 . Raise the vehicle.
For additional information, refer to Lifting
3 . Remove the radiator splash shield.
For additional information, refer to Radiator Splash Shield (76.22.90)
4 . Remove the radiator lower cowl.
5 . NOTE:
Discard the desiccant bag retaining screw O-ring seal.
Remove the desiccant bag retaining screw.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст