Jaguar XJ (X350). Manual — part 1084

Left-hand shown, right-hand similar.

Tighten to 55 Nm.

3 . NOTE:

Right-hand shown, left-hand similar.

Tighten to 40 Nm.

4 . NOTE:

Right-hand shown, left-hand similar.

Tighten to 40 Nm.

2 . NOTE:

5

.

NOTE:

For NAS vehicles only.

If required, carry out a long drive cycle.

For additional information, refer to Powertrain Control Module (PCM) Long Drive Cycle Self-

Test

www.

Catalytic Converter - 2.7L V6 - TdV6
(17.50.05)

Removal

1 . Remove the air deflector.

For additional information, refer to Air Deflector (76.11.41)

2 . NOTE:

Right-hand shown, left-hand similar.

Loosen the catalytic converter to particulate filter retaining clamp.

3 . NOTE:

Right-hand shown, left-hand similar.

Disconnect the catalytic converter temperature sensor electrical connectors.

Right-hand shown, left-hand similar.

Detach the catalytic converter temperature sensor wiring harness from the transmission.

5 . NOTE:

Right-hand shown, left-hand similar.

Remove and discard the catalytic converter to turbocharger retaining nuts.

6

.

CAUTION: Make sure the catalytic converter is fully supported during removal.

Failure to follow this instruction will result in damage to the catalytic converter decoupler

joint.

NOTE:

Right-hand shown, left-hand similar.

Remove the catalytic converter.

Remove the retaining bolts.

4 . NOTE:

www.