Jaguar XJ (X350). Manual — part 1490
3 . Fully seat the rear door window glass run weather-strip.
4 . NOTE:
Install a new rear door window glass exterior weather-strip.
Install the rear door window glass exterior weather-strip.
5 . NOTE:
Install a new rear door window moulding and retaining clips.
Install the rear door window moulding.
6 . Fully seat the rear door margin seal.
7 . Fully seat the rear door window glass interior weather-strip.
8 . Install the rear door inner weather-shield.
9 . Install the rear door inner weather-shield retaining screw covers.
www.
10 . Attach the rear door wiring harness grommet.
11 . Attach the rear door wiring harness.
Connect the rear door speaker electrical connector.
12 . Install the rear door quarter window blind.
For additional information, refer to Rear Door Quarter Window Blind
13 . Install the rear door trim panel.
For additional information, refer to Rear Door Trim Panel (76.34.04)
14
.
NOTE:
When the battery has been disconnected and connected the settings for the
windows one touch facility and the anti-trap facility will have been erased.
Initialize the door window motors.
For additional information, refer to Door Window Motor Initialization
Rear Door Window Glass (76.31.02)
Removal
1 . Remove the rear door fixed window glass.
For additional information, refer to Rear Door Fixed Window Glass
2 . Undo the rear door window glass retaining bolt.
3 . Detach the rear door window glass from the window regulator.
4 . Remove the rear door window glass.
Installation
1 . Install the rear door window glass.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст