Jaguar XJ (X350). Manual — part 1162
10 . Install the scuff plate trim panel.
11 . Connect the fuel transfer line.
12 . Connect the fuel transfer pipe quick release coupling.
For additional information, refer to Quick Release Coupling - Push Connect .
13 . Reposition and align the upper part of the fuel pump module.
14 . Align the arrow on the fuel pump module with the alignment marks on the fuel tank.
15
.
CAUTION: Make sure no damage occurs to the fuel pump module when installing
the locking ring.
Using the special tool, install the fuel pump module locking ring.
Install a new O-ring seal.
Tighten to 60 Nm.
www.
16 . Connect the fuel pump module quick release coupling.
For additional information, refer to Quick Release Coupling - Push Connect
17 . Connect the fuel fired booster heater fuel supply line quick release coupling.
For additional information, refer to Quick Release Coupling - Push Connect
18 . Connect the fuel pump module electrical connector.
19 . Attach the fuel pump module electrical connector to the retaining bracket.
20 . Install the floor aperture cover.
21 . Attach the floor covering.
22 . Install the scuff plate trim panel.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст