Jaguar XJ (X350). Manual — part 1163
23 . Install the rear seat cushion.
For additional information, refer to Rear Seat Cushion (76.70.37)
24 . Attach the fuel tank filler pipe cap.
25 . Close the fuel tank filler pipe flap.
26 . Connect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
Inertia Fuel Shutoff (IFS) Switch (18.30.35)
Removal
1 . Remove the cowl side trim panel.
1) Detach the door opening weatherstrip.
2) Detach the scuff plate trim panel.
3) Remove the cowl side trim panel.
2 . Disconnect the inertia fuel shutoff (IFS) switch electrical connector.
3 . Remove the IFS switch.
Installation
1 . To install, reverse the removal procedure.
www.
310-02 : Acceleration Control
Specifications
Specifications
Torque Specifications
Description
Nm lb-ft lb-in
Acceleratror pedal 10 7
89
Description and operation
Acceleration Control
Item Part Number
Description
1
—
Engine control module (ECM)
2
—
Throttle body (Vehicles with supercharger)
3
—
Instrument cluster (IC)
4
—
Accelerator pedal
5
—
Throttle body (Vehicles without supercharger)
6
—
Throttle body (Vehicles with 3.0L engine)
When the accelerator pedal is applied, the two accelerator position sensors measure the pedal
movement and provide an output voltage proportional to pedal movement to the engine
control module (ECM). Two sensors are used as a safety feature. The accelerator pedal has
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст