Jaguar XJ (X350). Manual — part 753
PI02, pin 02
Pin 62
Cylinder 2 ignition coil connector, harness side ECM connector PI300, harness side
PI06, pin 02
Pin 64
Cylinder 3 ignition coil connector, harness side ECM connector PI300, harness side
PI03, pin 02
Pin 64
Cylinder 4 ignition coil connector, harness side ECM connector PI300, harness side
PI07, pin 02
Pin 62
Cylinder 5 ignition coil connector, harness side ECM connector PI300, harness side
PI04, pin 02
Pin 64
Cylinder 6 ignition coil connector, harness side ECM connector PI300, harness side
PI08, pin 02
Pin 62
Is the resistance greater than 5 ohms?
-> Yes
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. CLEAR the
DTCs and test the system for normal operation.
-> No
INSTALL a new ignition coil to the relevant cylinder.
Ignition Coil-On-Plug LH (18.20.44) or
Ignition Coil-On-Plug RH (18.20.43) Clear the DTC and test the system for normal operation. Refer to
the warranty policy and procedures manual if an ECM is suspect.
PINPOINT TEST G531326p2 : CHECK
SPARK PLUG RESISTANCE
G531326t11 : CHECK SPARK PLUG RESISTANCE
1. Remove the suspect spark plug(s). 2. Measure the resistance between:
Spark plug
Spark plug
Center electrode tip HT contact
Is the resistance between 8,000 and 12,000 ohms? (nominal 10,000 ohms)
-> Yes
CHECK the ignition coil and circuits. GO to Pinpoint Test G531326p1.
-> No
INSTALL a new spark plug. CLEAR the DTC and test the system for normal operation.
www.
Removal and installation
Ignition Coil-On-Plug LH (18.20.44)
Removal
1 . Disconnect the ignition coil-on-plug electrical connector.
2 . Remove the ignition coil-on-plug.
Installation
1 . To install, reverse the removal procedure.
Tighten to 6 Nm.
Ignition Coil-On-Plug RH (18.20.43)
Removal
1 . Remove the intake manifold. <<303-01A>>
2 . Disconnect the ignition coil-on-plug electrical connector.
3 . Remove the ignition coil-on-plug.
Installation
1 . To install, reverse the removal procedure.
Tighten to 6 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст