Jaguar XJ (X350). Manual — part 405

Crankshaft Front Seal - VIN Range:
G45704->G99999 (12.21.14)

Special Service Tools

Installer, crankshaft front seal

303-750

Remover, crankshaft front seal

303-751

Removal

1 . Remove the crankshaft pulley.

For additional information, refer to

2 . Using the special tool, remove the crankshaft front seal.

Installation

1 .

CAUTION: Make sure the crankshaft front seal mating faces are clean and dry.

CAUTION: Do not remove the crankshaft front seal protector.

Using the special tool, install the crankshaft front seal.

2 . Remove the crankshaft seal protector.

3 . Install the crankshaft pulley.

For additional information, refer to

www.

Crankshaft Pulley (12.21.09)

Special Service Tools

Locking Tool, Crankshaft Pulley

303-191

Adapter for 303-191/303-588

303-191-02

Remover, Crankshaft Pulley

303-588

Installer/remover, Oil Filter

303-752

Removal

All vehicles

1 . Remove the cooling fan motor and shroud.

For additional information, refer to Cooling Fan Motor and Shroud (26.25.25)

2 . Remove the accessory drive belt .

For additional information, refer to Accessory Drive Belt - 3.5L/4.2L (12.10.40)

Vehicles without supercharger

3 . NOTE:

Place a suitable container underneath the filter to prevent oil spillage.

Using the special tool, remove and discard the oil filter element.

4 . Detach the oil cooler.

Remove and discard the O-ring seal.

5 . Lower the vehicle

All vehicles

6

.

CAUTION: Under no circumstances should the crankshaft setting peg 303-645 be

used in the following operations to lock the crankshaft.

www.