Jaguar XJ (X350). Manual — part 1228

Lubricate the new 0-ring seal with A/C refrigerant oil.

2 . Install the pressure cutoff switch.

1) Tighten to 8 Nm.

3 . Connect the pressure cutoff switch electrical connector.

4 . Clean off any oil residue that may contain A/C system fluorescent dye.

5 . Install the air cleaner.

For additional information, refer to Air Cleaner (19.10.05)

For additional information, refer to Air Cleaner (19.10.05)

6 . Carry out the A/C system fluorescent dye leak detection procedure.

For additional information, refer to Fluorescent Dye Leak Detection

Pressure Cutoff Switch - 2.7L V6 - TdV6
(82.10.32)

Removal

1

.

Carry out the air conditioning (A/C) system recovery procedure.

For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and

Charging (82.30.30)

2 . Remove the radiator splash shield.

For additional information, refer to Radiator Splash Shield (76.22.90)

3 . Disconnect the pressure cutoff switch electrical connector.

4 . Remove the pressure cutoff switch.

Remove and discard the pressure cutoff switch O-ring seal.

www.

Installation

1 . NOTE:

Install a new pressure cutoff switch O-ring seal.

NOTE:

Lubricate the new O-ring seal with A/C refrigerant oil.

Install the pressure cutoff switch.

Tighten to 8 Nm.

2 . Connect the pressure cutoff switch electrical connector.

3 . Clean off any oil residue that may contain A/C system fluorescent dye.

4 . Install the radiator splash shield.

For additional information, refer to Radiator Splash Shield (76.22.90)

5

.

Carry out the A/C system evacuation and charging procedure.

For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and

Charging (82.30.30)

6 . Carry out the A/C system fluorescent dye leak detection procedure.

For additional information, refer to Fluorescent Dye Leak Detection

www.