Jaguar XJ (X350). Manual — part 1409

16. Install the luggage compartment lid striker.

•

Tighten to 9 Nm.

17. Install the luggage compartment trim panel.

18. Install the luggage compartment trim panel lower retaining clips.

19. Reposition the luggage compartment floor covering.

Rear Door Alignment (76.28.08)

1. Remove the B-pillar trim panel. <<501-05>>


2. Remove the rear door aperture seal.

3. Remove the rear door striker.

4. Detach the front safety belt retractor.

5. Loosen the rear door upper hinge retaining nuts.

www.

6. Loosen the rear door lower hinge retaining nuts.

7. NOTE:

Make sure the spacing between the rear door to front door, rear door to rear fender, rear
door to roof panel and rear door to sill are equal.

Set the rear door to the correct alignment.

8. Tighten the rear door lower hinge retaining nuts.

•

Tighten to 30 Nm.

9. Tighten the rear door upper hinge retaining nuts.

•

Tighten to 30 Nm.

10. Attach the front safety belt retractor.

•

Tighten to 35 Nm.

11. Install the rear door striker.

•

Tighten to 28 Nm.

12. Install the rear door aperture seal.

13. Install the B-pillar trim panel. <<501-05>>

www.