Jaguar XJ (X350). Manual — part 699
15 . Attach the fuel line.
Remove and discard the blanking caps.
16 . Connect the fuel line.
Remove and discard the blanking caps.
17 . Connect the FRP sensor electrical connector.
18 . Attach the fuel line retaining nut.
Tighten to 7 Nm.
19
.
Install a new high pressure fuel supply line.
Remove and discard the blanking caps.
Install but do not tighten the high pressure fuel supply line.
Tighten the high-pressure fuel supply line in the sequence shown in four
stages:
Stage 1: Tighten the high-pressure fuel supply line union 1 to 15 Nm.
Stage 2: Tighten the high-pressure fuel supply line union 2 to 15 Nm.
Stage 3: Tighten the high-pressure fuel supply line union 1 to 30 Nm.
Stage 4: Tighten the high-pressure fuel supply line union 2 to 30 Nm.
20 . Connect the low pressure fuel inlet and return lines.
Remove and discard the blanking caps.
www.
21 . Install the fuel injector sound proofing.
22 . Install the fuel injection pump belt rear cover.
Tighten to 7 Nm.
23 . Attach the EGR coolant outlet tube.
Tighten to 10 Nm.
24 . Install the fuel injection pump pulley.
25 . Install the retaining nut.
Using the special tool, retain the fuel injection pump pulley.
Tighten to 50 Nm.
26 . Install the camshaft rear pulley.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст