Jaguar XJ (X350). Manual — part 222

5 . Detach the parking brake module.

6 . Remove the parking brake module.

Installation

1

.

NOTE:

If a new parking brake module is installed it must be configured using the Jaguar

approved diagnostic system.

To install, reverse the removal procedure.

Tighten to 4 Nm.

2 . Tighten to 10 Nm.

www.

Parking Brake Pads - Vehicles With: High
Performance Brakes (70.40.04)

Special Service Tools

Brake caliper piston retractor.

206-081

Removal

1 . Carry out the parking brake cable tension release.

For additional information, refer to

2 . Remove both rear wheels and tires.

<<204-04>>

3 . Detach the parking brake cable.

1) Reposition the parking brake caliper lever.

2) Detach the parking brake cable.

4 . Remove the parking brake pads.

1) Remove the parking brake pad retaining pins.

2) Remove the parking brake pad anti-rattle spring plate.

3) Remove the parking brake pads.

5 . NOTE:

Note using special tool 206-081 retract the parking brake caliper piston.

Remove the parking brake caliper.

Remove and discard the parking brake caliper retaining bolts.

Installation

1

.

CAUTION: Make sure the brake disc faces are clean before installation.

CAUTION: Brake pads must always be replaced in axle sets.

www.