Defender 90 NAS. Manual — part 98
86
ELECTRICAL
8
REPAIR
STARTER SWITCH
Service repair no - 86.65.03
Remove
1. Remove instrument panel.
See
INSTRUMENTS, Repair, Instrument panel
2. Remove steering column nacelle.
3. Note position of harness leads on back of starter
switch and disconnect lukars.
4. Remove single screw and withdraw starter
switch from steering column lock.
Refit
5. Fit new switch in steering column lock.
6. Connect harness leads to starter switch.
7. Fit steering column nacelle.
8. Fit instrument panel.
See INSTRUMENTS,
Repair, Instrument panel; Refit
WINDSCREEN WIPER/WASHER SWITCH
Service repair no - 84.15.34
Remove
1. Remove steering column nacelle.
2. Disconnect switch multi-plug from main harness.
3. Remove 2 screws and star washer securing
switch to mounting bracket.
4. Remove switch complete with harness.
Refit
5. Fit new switch to mounting bracket.
6. Reconnect switch multi-plug.
7. Fit steering column nacelle.
ELECTRICAL
9
REPAIR
DIRECTION INDICATOR/HEADLAMP/HORN
SWITCH
Service repair no - 86.65.55
Remove
1. Remove steering column nacelle.
2. Disconnect 3 steering column switch multi-plugs
from main harness.
3. Slacken clamp screw and withdraw switch
assembly from steering column.
4. Remove fixings and detach windscreen
wiper/washer and main lighting switches from
mounting bracket.
5. Renew complete direction
indicator/headlamp/horn switch and switch
bracket assembly.
Refit
6. Fit main lighting and windscreen wiper/washer
switches to mounting bracket.
7. Position switch assembly on steering column
and fully tighten clamp.
8. Reconnect switch multi-plugs.
9. Fit steering column nacelle.
MAIN LIGHT SWITCH
Service repair no - 86.65.10
1. Remove steering column nacelle.
2. Disconnect main light switch multi-plug from
main harness.
3. Slacken locknut and release light switch from
slot in mounting bracket.
Refit
4. Fit light switch in mounting bracket.
5. Reconnect switch multi-plug.
6. Fit steering column nacelle .
86
ELECTRICAL
10
REPAIR
SWITCH PANEL - REAR DOOR SERVICES
Service repair no - 86.65.78
Remove
1. Release screw caps from top fixings and remove
screws. Prise out 2 trim studs securing bottom of
switch panel to fascia.
2. Withdraw switch panel and disconnect
multi-plugs from switches and module.
3. Pull harness multi-plugs through aperture in
base of panel.
Refit
4. Feed harness into switch panel and reconnect
multi-plugs.
5. Position switch panel on fascia and secure with
screws and trim studs.
HEATED REAR SCREEN, REAR WIPER AND
WASHER SWITCHES
Service repair no - 86.65.36 - Heated rear screen
Service repair no - 84.35.33 - Rear wiper
Service repair no - 84.30.27 - Rear washer
Remove
1. Remove rear door switch panel.
See Switch
panel - rear door services
2. Disconnect multi-plug from rear of switch.
3. Press in retaining lugs and push switch through
panel aperture.
4. Remove switch.
Refit
5. Fit new switch into switch panel.
6. Reconnect switch multi-plug .
7. Fit switch panel to fascia. see86rep>Switch
panel - rear door services
ELECTRICAL
11
REPAIR
CIGAR LIGHTER
Service repair no - 86.65.60
Remove
1. Remove 2 screws and withdraw switch panel
from lower fascia.
2. Disconnect electrical leads from switch housing,
including illumination bulb.
3. Release 2 retaining tags and remove bulb holder
from switch housing.
4. Remove cigar lighter from switch housing.
5. Press in retaining tags and withdraw housing
from switch panel.
Refit
6. Fit housing to switch panel.
7. Fit bulb holder to switch housing.
8. Connect electrical leads and illumination bulb.
9. Insert cigar lighter into switch housing.
10. Fit switch panel to lower fascia.
HAZARD WARNING SWITCH
Service repair no - 86.65.50
Remove
1. Remove 2 screws and withdraw switch panel
from lower fascia.
2. Disconnect multiplug from hazard warning
switch.
3. Depress retainers and withdraw switch from
panel.
Refit
4. Fit new switch to switch panel.
5. Connect multiplug to switch.
6. Fit switch panel.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст