Discovery 2. Manual — part 669
SEATS
REPAIRS 76-5-27
30. Remove headrest guides.
31. Fold cover fully upwards and remove.
Refit
1. Fit squab cover to top of seat. Do not fold down
too far onto seat.
2. Fit headrest guides.
3. Fit grab handles to seat and secure with
screws.
4. Ensure top of cover fits correctly around grab
handles.
5. Fit bar securing rear of squab cover to seat
frame.
6. Fit hog rings securing rear of squab cover to
seat frame.
7. Pull cover down tight and align hog ring
location points.
8. Fit third row of hog rings.
9. Pull cover down tight and feed hooks though
foam.
10. Connect hooks to rear of squab frame.
11. Align stowage pocket elastic to seat frame and
secure with trim clips.
12. Pull cover down tight and align hog ring
location points.
13. Fit second row of hog rings.
14. Pull cover down tight and align hog ring
location points.
15. Fit first row of hog rings.
16. Pull cover down tight and connect hooks to
squab frame.
17. Feed front of cover through to rear.
18. Secure bottom of cover to frame with clip.
19. Fit clips securing ends of cover to frame.
20. Fit headrest to seat.
21. Turn seat upside down.
22. Secure rear edge of squab cover to frame with
clip.
23. Turn seat correct way up.
24. Fit inner edge trim casing to seat frame.
25. Fit outer edge trim casing and secure with
screws.
26. Position arm rest to seat, secure with screw and
loosen arm rest adjuster to the required
position.
SEATS
76-5-28 REPAIRS
Cover - squab - RH rear seat
$% 78.90.13
Remove
1. Remove rear seat.
2. Remove centre rear seat belt.
3. Remove 2 screws securing end cover and
remove end cover.
4. Remove both head restraint guide tubes.
5. Remove 2 screws securing squab release
lever, release cable and remove lever
assembly.
6. Release catches securing arm rest supports,
lower arm rest, release arm rest hinge catches
and remove arm rest assembly.
7. Release squab from 10 hooks in arm rest
recess.
SEATS
REPAIRS 76-5-29
8. Release top and bottom rap round clips in arm
rest recess.
9. Remove 3 studs securing squab to centre of
frame.
10. Release squab from 5 studs securing RH side.
11. Release 9 side clips securing squab to frame,
release and remove squab assembly.
12. Release squab from sides of pad to access
hog rings.
13. Remove 29 hogs rings and remove squab
cover from pad.
Refit
1. Position squab to pad and secure with hog
rings.
2. Position squab assembly to frame and secure
side clips.
3. Secure squab to hooks at RH side and fit studs
to centre of frame.
4. Fit top and bottom rap round clips and hooks in
arm rest recess.
5. Fit and secure arm rest assembly.
6. Position squab release lever, connect cable
and secure with screws.
7. Fit head restraint guide tubes.
8. Position end cover and secure with screws.
9. Fit centre rear seat belt.
10. Fit rear seat.
Heating element - squab - front seat
$% 78.90.36
Remove
1. Remove front seat squab cover.
SEATS, REPAIRS, Cover - squab -
2. Disconnect heating element multiplug.
3. Carefully release heating element from squab
pad, ensuring adhesive does not tear squab
pad.
Refit
1. Ensure squab pad is free of adhesive.
2. Remove adhesive cover from new heating
element, position element and secure to squab
pad.
3. Fit front seat squab cover.
SEATS
76-5-30 REPAIRS
Head restraint - third row seat
$% 78.50.10
Remove
1. Fold down both third row head restaints.
2. Release upper tail gate finisher from 6 clips and
remove finisher.
3. Remove 3 bolts securing head restraint and
remove head restraint.
Refit
1. Position head restraint, fit and tighten bolts.
2. Position upper tail gate finisher and secure in
clips.
M78 0493
M78 0494
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст