Range Rover. Manual — part 296
AIR CONDITIONING
5
REPAIR
EVAPORATOR TEMPERATURE SENSOR
Service repair no - 82.20.95
Remove
1. RHD vehicles. Remove fascia closing panel to
gain access to sensor.
See CHASSIS AND
BODY, Repair.
2. LHD vehicles. Open glove box. Remove 5
screws securing glove box liner to fascia.
3. Release glove box liner. Disconnect lamp
multiplug.
4. Release cable from glove box latch.
5. Lower glove box liner from fascia to gain access
to sensor.
6. All vehicles. Disconnect sensor multiplug.
7. Turn sensor anti-clockwise, remove from
evaporator casing.
Refit
8. Reverse removal procedure.
82
AIR CONDITIONING
NEW RANGE ROVER
6
REPAIR
CONDENSER - V8
Service repair no - 82.15.07
Remove
1. Disconnect battery negative lead.
2. Remove front grille.
See CHASSIS AND BODY,
Repair.
3. Remove front bumper.
See CHASSIS AND
BODY, Repair.
4. Discharge air conditioning system.
See
Adjustment.
5. Remove 4 bolts securing bonnet platform.
6. Release clips securing bonnet release cable.
Remove bonnet platform.
7. Disconnect 2 multiplugs from condenser cooling
fans.
8. Remove 4 bolts securing fans to condenser.
Remove fans.
9. Remove studs securing oil cooler LH air
deflector to body. Remove deflector.
10. Disconnect 2 pipes from condenser. Remove ’O’
rings and discard. Plug pipes and connections.
AIR CONDITIONING
7
REPAIR
11. Remove 2 bolts securing condenser upper
mounting brackets to radiator mounting.
12. Remove 2 lower securing bolts. Remove
condenser.
13. Remove 2 bolts securing mounting brackets to
condenser. Remove brackets.
Refit
14. Fit mounting brackets to condenser. Secure with
bolts.
15. Position condenser. Secure with bolts.
16. Remove plugs from pipes and condenser.
17. Lubricate new ’O’ rings with compressor oil. Fit
to connections.
18. Connect pipes to condenser. Tighten to
15 Nm.
(11 lbf.ft)
19. Position LH air deflector. Secure with studs.
20. Position cooling fans. Secure with bolts. Connect
multiplugs.
21. Position bonnet platform. Secure bonnet release
cable with strap.
22. Secure bonnet platform with bolts.
23. Refit front bumper.
See CHASSIS AND BODY,
Repair.
24. Refit front grille.
See CHASSIS AND BODY,
Repair.
25. Evacuate and recharge air conditioning system.
See Adjustment.
26. Reconnect battery negative lead.
82
AIR CONDITIONING
NEW RANGE ROVER
8
REPAIR
CONDENSER - DIESEL
Service repair no - 82.15.07
Remove
1. Disconnect battery negative lead.
2. Discharge air conditioning system.
See
Adjustment.
3. Remove intercooler.
See FUEL SYSTEM,
Repair.
4. Remove 2 studs securing LH deflector panel.
Remove panel.
5. Release 2 bolts securing condenser to radiator
bracket.
NOTE: Gain access to bolts through
bumper grille. Leave bolts positioned in
condenser to aid assembly.
6. Remove 2 nuts securing air conditioning pipe
clips to condenser fans.
7. Disconnect 2 pipes from condenser. Remove ’O’
rings and discard.
8. Plug pipe connections.
9. Raise condenser for access. Disconnect 2
condenser fan multiplugs.
10. Remove condenser assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст