Range Rover. Manual — part 298
AIR CONDITIONING
13
REPAIR
CONDENSER FAN
Service repair no - 82.15.01
Remove
1. Disconnect battery negative lead.
2. Raise the vehicle.
WARNING: Support on safety stands.
3. Remove front grille.
See CHASSIS AND BODY,
Repair.
4. Remove front bumper.
See CHASSIS AND
BODY, Repair.
5. Disconnect 2 multiplugs from condenser cooling
fans.
6. Remove 4 bolts securing condenser fan
assembly.
7. Remove fan and cowl assembly.
8. Release multiplug holder from fan cowl.
9. Remove 3 nuts securing motor to cowl. Remove
motor.
Refit
10. Reverse removal procedure.
82
AIR CONDITIONING
NEW RANGE ROVER
14
REPAIR
THERMOSTATIC EXPANSION VALVE (TXV) - V8
UP TO 99MY AND DIESEL FROM 95MY
Service repair no - 82.25.01
Remove
1. Disconnect battery negative lead.
2. Depressurise air conditioning system.
See
Adjustment.
3. Remove clamp securing air conditioning pipes to
bulkhead.
4. Remove bolt securing pipe clamp to TXV.
Position clamp aside.
5. Release pipes from TXV. Position aside. Discard
’O’ rings. Plug pipes and connections.
6. Remove 2 bolts securing TXV to evaporator.
7. Remove TXV.
8. Remove ’O’ rings and discard. Plug evaporator
and TXV ports.
Refit
9. Remove plugs.
10. Ensure all mating faces are clean.
11. Lubricate new ’O’ rings with compressor oil. Fit
to pipes.
12. Position TXV to evaporator pipes.
13. Ensure TXV is fully engaged to evaporator
pipes. Secure with bolts.
14. Engage pipes to TXV. Secure pipe clamp with
bolt.
15. Secure air conditioning pipes to bulkhead with
clamp.
16. Evacuate and recharge air conditioning system.
See this section.
17. Reconnect battery negative lead.
AIR CONDITIONING
15
REPAIR
THERMOSTATIC EXPANSION VALVE (TXV) - V8
FROM 99MY
Service repair no - 82.25.01
Remove
1. Depressurise A/C system.
See Adjustment.
2. Remove IAC valve.
See FUEL SYSTEM,
Repair.
3. Release throttle and cruise control cables from
clips on manifold chamber and position cables
aside.
4. Remove bolt securing engine harness mounting
bracket to manifold chamber.
5. Remove nut securing engine harness to bracket
on bulkhead and release harness.
6. Remove clamp securing A/C pipes to bulkhead.
7. Remove bolt securing A/C pipe clamp to TXV
and position clamp aside.
8. Release A/C pipes from TXV, discard ’O’ rings
and position pipes aside.
CAUTION: Immediately cap all air
conditioning pipes to prevent ingress of
dirt and moisture into the system.
82
AIR CONDITIONING
NEW RANGE ROVER
16
REPAIR
9. Remove 2 bolts securing TXV to evaporator
pipes and remove TXV.
10. Remove and discard ’O’ rings from evaporator
pipes.
CAUTION: Immediately cap all air
conditioning pipes to prevent ingress of
dirt and moisture into the system.
Refit
11. Ensure mating faces of TXV and pipes are
clean.
12. Lubricate new ’O’ rings with compressor oil and
fit rings to pipes.
13. Fit TXV to evaporator pipes, ensuring that TXV
is fully engaged to pipes.
14. Fit and tighten bolts securing TXV to evaporator
pipes.
15. Fit A/C pipes to TXV, position pipe clamp and
secure with bolt.
16. Secure A/C pipes to bulkhead with clamp.
17. Fit engine harness to bracket on bulkhead and
secure with nut.
18. Align engine harness mounting bracket to
manifold chamber and secure with bolt.
19. Fit throttle and cruise control cables to clips.
20. Fit IAC valve.
See FUEL SYSTEM, Repair.
21. Recharge A/C system.
See Adjustment.
SOLAR SENSOR
Service repair no - 82.20.92
Remove
1. Prise solar sensor from central screen demist
vent.
2. Disconnect sensor from multiplug. Remove
sensor.
Refit
3. Reverse removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст