Range Rover. Manual — part 338
88 - INSTRUMENTS
CONTENTS
Page
REPAIR
INSTRUMENT BINNACLE
1
. . . . . . . . . . . . . . . . . . . . ...
CLOCK
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COOLANT TEMPERATURE SENSOR - V8 - UP TO 99MY
3
. . . . . . . .
COOLANT TEMPERATURE SENSOR - DIESEL
3
. . . . . . . . . . . .
INSTRUMENT PACK
4
. . . . . . . . . . . . . . . . . . . . . . ...
FUEL TANK SENDER UNIT
4
. . . . . . . . . . . . . . . . . . . .
FUEL TANK SENDER UNIT - ADVANCED EVAPS
5
. . . . . . . . . . .
INSTRUMENTS
1
REPAIR
INSTRUMENT BINNACLE
Service repair no - 88.20.02
Remove
1. Remove covers from screws securing fascia
closing panel.
2. Remove 4 screws, release fascia closing panel.
3. Disconnect drivers lap vent duct. Remove fascia
closing panel.
4. Remove 4 screws securing instrument binnacle
to fascia.
5. Release binnacle from fascia. Disconnect fuel
filler flap release switch multiplug.
6. Remove binnacle.
Refit
7. Position binnacle.
8. Connect multiplug to fuel filler flap release
switch. Align to fascia.
9. Fit screws securing instrument binnacle to
fascia.
10. Position fascia closing panel. Connect drivers
lap vent.
11. Align closing panel. Secure with screws.
12. Fit screw covers.
88
INSTRUMENTS
NEW RANGE ROVER
2
REPAIR
CLOCK
Service repair no - 88.15.07
Remove
1. Remove instrument pack binnacle.
See this
section.
2. Move both front seats to the fully rearward
position.
3. Remove screws securing each side panel to
centre console, release sprag clips from fascia
switch pack. Remove side panels.
4. Remove radio applique.
5. Remove 5 screws securing switch pack.
6. Release switch pack from fascia.
7. Disconnect multiplug and Lucar connector from
clock.
8. Release clips. Remove clock from switch pack.
Refit
9. Reverse removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст