Frelander 2. Manual — part 486
Check the headlamp alignment and adjust if necessary.
2.
Exterior Lighting - Rear Lamp Assembly
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
1.
CAUTION: Take extra care not to damage the
edges of the component.
Torque: 2 Nm
1.
2.
3. NOTE: Do not disassemble further if the component
is removed for access only.
3.
Installation
To install, reverse the removal procedure.
1.
Exterior Lighting - High Mounted Stoplamp
Removal and Installation
Removal
Remove the liftgate upper trim panel.
Refer to:
Liftgate Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
1.
2.
3. NOTE: Do not disassemble further if the component
is removed for access only.
3.
Installation
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст