Frelander 2. Manual — part 487
Exterior Lighting - Headlamp Switch
Removal and Installation
Removal
1.
CAUTION: Protect the surrounding trim to avoid
damage.
1.
Installation
To install, reverse the removal procedure.
1.
Exterior Lighting - Side Turn Signal Lamp
Removal and Installation
Removal
1.
Installation
To install, reverse the removal procedure.
1.
Exterior Lighting - Headlamp Leveling Module
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Remove the glove compartment.
Refer to:
Glove Compartment
(501-12 Instrument Panel and
Console, Removal and Installation).
1.
Torque: 7 Nm
2.
Installation
To install, reverse the removal procedure.
1.
Using the Land Rover approved diagnostic system, calibrate a new
module.
2.
Exterior Lighting - Trailer Module
Removal and Installation
Removal
• NOTE: The trailer module is fitted with a replaceble fuse.
Remove the LH rear quarter trim panel.
Refer to:
Rear Quarter Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
1.
Remove the trailer module.
2.
3. NOTE: Do not disassemble further if the component
is removed for access only.
Remove the fuse.
3.
Installation
To install, reverse the removal procedure.
1.
Using the Land Rover approved diagnostic system, calibrate a new
module.
2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст