Frelander 2. Manual — part 91
3. CAUTIONS:
Take extra care not to damage the edges of the
component.
Take extra care not to damage the mating faces.
Using the special tool, punch a hole in the oil seals
outer edge.
Special Tool(s):
303-538
3.
4. CAUTIONS:
Take extra care not to damage the mating faces.
Be prepared to collect escaping oil.
Using the special tools and a self tapping screw,
remove the oil seal.
Special Tool(s):
308-615
,
100-012
4.
Installation
1. CAUTIONS:
Take extra care not to damage the seal.
Make sure that the area around the component is
clean and free of foreign material.
Using the special tool, install the new drive pinion seal.
Special Tool(s):
205-865
1.
Install the active on-demand coupling.
Refer to:
Active On-Demand Coupling
(205-02 Rear Drive
Axle/Differential, Removal and Installation).
2.
Check and top-up the differential case.
Refer to:
Differential Draining and Filling
(205-02 Rear Drive
Axle/Differential, General Procedures).
3.
Rear Drive Axle/Differential - Rear Halfshaft Seal
Removal and Installation
Special Tool(s)
205-863
Installer, Halfshaft Seal
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
2.
Remove the halfshaft.
Refer to:
Rear Halfshaft LH
(205-05 Rear Drive Halfshafts, Removal
and Installation).
3.
4. CAUTIONS:
Take extra care not to damage the mating faces.
Take extra care not to damage the edges of the
component.
4.
Installation
1. CAUTIONS:
Make sure that the seal is correctly located.
Take extra care not to damage the seal.
Using the special tool, install a new rear halfshaft oil
seal.
Special Tool(s):
205-863
1.
Install the halfshaft.
Refer to:
Rear Halfshaft LH
(205-05 Rear Drive Halfshafts, Removal
and Installation).
2.
Install the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
3.
Front Drive Axle/Differential - Front Drive Axle and Differential
Description and Operation
For additional information, refer to:
Transmission Description
(307-01 Automatic Transmission/Transaxle, Description and
Operation).
For additional information, refer to:
Manual Transmission and Clutch
(308-00 Manual Transmission/Transaxle and Clutch -
General Information, Description and Operation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст