Frelander 2. Manual — part 92
Front Drive Axle/Differential - Front Drive Axle
Diagnosis and Testing
For additional information.
REFER to:
Driveline System
(205-00 Driveline System - General Information, Diagnosis and Testing).
Front Drive Halfshafts -
General Specification
Item
Specification
Type
Fully floating, solid shafts with inner and outer constant velocity joints
Recommended Lubricant
Item
Specification
Front drive halfshaft (auto only)
W eicon anti-seize grease
Outboard joint
Use grease supplied with replacement boot kit
Inboard joint
Use grease supplied with replacement boot kit
Torque Specifications
Description
Nm
lb-ft
Extension shaft bearing anchorage to block bolts - 3.2L Petrol
48
35
Extension shaft bearing anchorage to transmission bolts - 3.2L Petrol
25
18
Extension shaft bearing anchorage to block bolts- 2.2L Diesel
65
48
Extension shaft bearing anchorage to transmission bolts - 2.2L Diesel
25
18
Front halfshaft to hub bolt*
45 + 80°
33 + 80°
Heat shield to bearing anchorage
10
7
* New nuts/bolts must be fitted
Front Drive Halfshafts - Front Drive Halfshafts
Description and Operation
COMPONENT LOCATION
Item
Part Number
Description
1
-
Halfshaft - RH (right-hand)
2
-
Halfshaft - LH (left-hand)
OVERVIEW
Constant Velocity Joints
Item
Part Number
Description
A
-
Inner constant velocity joint
B
-
Outer constant velocity joint
Each halfshaft comprises a solid steel shaft with inner and outer constant velocity joints. The inner joint is the 'tripode'
type with spherical bushing to reduce sliding resistance; the shaft and inner joint are one assembly.
The outer joint is the 'ball and socket' type, with a splined connection between the joint and the shaft. The joints are
packed with grease and protected by gaiters.
The halfshafts are of equal length to eliminate stiffness-related torque-steer.
Bearing Anchorage - Diesel Derivative
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст